luluboy 发表于 2007-7-11 13:58:40

^_^ 我把它找出来了

就在console的“登陆”中的“DEBUG”中能显示详细的东东。。。哦
前提是 在右边信息窗口右键并选择“邮件”，勾选需要DEBUG的项目“确认”即可。


推荐大家可以去http://forums.kerio.com多看看。

关于DEBUG相关讨论可以去看：
http://forums.kerio.com/index.php?t=msg&goto=37214&S=de47afd819ecfd245f371aaaf2a2df32&srch=log+detail#msg_37214

tdk 发表于 2007-7-11 15:27:09

原帖由 luluboy 于 2007-7-11 13:58 发表 http://www.5dmail.net/bbs/images/common/back.gif
就在console的“登陆”中的“DEBUG”中能显示详细的东东。。。哦
前提是 在右边信息窗口右键并选择“邮件”，勾选需要DEBUG的项目“确认”即可。


推荐大家可以去http://forums.kerio.com多看看。

关 ...

太好了！！！！！这个贴价值更高了！

luluboy 发表于 2007-7-11 16:55:08

发信LOG 状态启用SSL

{threadpool} KThreadPool::workerThread service-smtp: worker 509 handles task 20402
{threadpool} Task 20402 handler starting
{smtps} SMTP server session begin; client connected from 61.xxx.xxx.xxx:28451
{smtps} Sent SMTP greeting to 61.xxx.xxx.xxx:28451
{smtps} Command EHLO mis
{smtps} Sent reply to EHLO: 250 cn.AAAA.com ...
{smtps} Command AUTH LOGIN
{smtps} Started authentication method LOGIN
{ldapdb} AAAA@cn.AAAA.com: Looking up in cache...
{ldapdb} AAAA@cn.AAAA.com: Looking up in cache...
{ldapdb} AAAA@cn.AAAA.com: found in cache
{ldapdb} AAAA@cn.AAAA.com: Looking up in cache...
{ldapdb} AAAA@cn.AAAA.com: found in cache
{smtps} Sent reply to AUTH: 235 2.0.0 Authentication successful (user AAAA@cn.AAAA.com)
{smtps} Command MAIL FROM: <AAAA@cn.AAAA.com>
{qproc} Queue injection started, id=46945231-0000481b
{smtps} Sent reply to MAIL: 250 2.1.0 Sender <AAAA@cn.AAAA.com> ok
{smtps} Command RCPT TO: <BBBB@tw.BBBB.com>
{smtps} Sent reply to RCPT: 250 2.1.5 Recipient <BBBB@tw.BBBB.com> ok (remote)
{smtps} Command DATA
{smtps} 768 bytes received in command DATA
{qproc} Queue injection finished, id=46945231-0000481b
{smtps} Message accepted for delivery
{smtps} Command QUIT
{smtps} SMTP server session end
{threadpool} KThreadPool::workerThread service-smtp: worker 509 task 20402 handled
{threadpool} KThreadPool::releaseTask pool service-smtp: sleepingThreadCount=1, newStatus=4
{threadpool} WorkerList service-smtp: count=2; status: 509s2 510s4
{threadpool} KThreadPool::createWorkerThread: Manager or listener 2546 creating new worker thread
{threadpool} TaskList DeliveryThreadPool: count=1; status: 15214
{threadpool} KThreadPool::submitTask DeliveryThreadPool: bAccepTask=1, bCreateThread=1, liveThreadCount=0,sleepingThreadCount=0,
maxWorkersCount=1000, taskQueueSize=0
{threadpool} KThreadPool::workerThread DeliveryThreadPool: worker 15214 starts processing
{threadpool} KThreadPool::workerThread DeliveryThreadPool: worker 15214 handles task 15214
{ldapdb} AAAA@cn.AAAA.com: Looking up in cache...
{ldapdb} AAAA@cn.AAAA.com: found in cache
{alias} Alias processing begin, recipient=BBBB@tw.BBBB.com
{alias} Searching for match to BBBB@tw.BBBB.com at level 0
{alias} No match for BBBB@tw.BBBB.com, expansion finished
{alias} Searching for address eugenesung in domain tw.BBBB.com...
{alias} Address BBBB@tw.BBBB.com expanded to remote address BBBB@tw.BBBB.com
{ldapdb} AAAA@cn.AAAA.com: Looking up in cache...
{ldapdb} AAAA@cn.AAAA.com: found in cache
{qproc} SEND_MX: Started delivery of queued message id=46945231-0000481b sender=<AAAA@cn.AAAA.com>
{qproc} SEND_MX: Delivering to remote domain tw.BBBB.com...
{qproc} SEND_MX: Created batch of 1 recipients for domain tw.BBBB.com
{dns} Searching cache for MX records for host tw.BBBB.com
{smtpc} Connecting to mail.tw.BBBB.com, delivering mail from <AAAA@cn.AAAA.com>
{conn} Looking up host mail.tw.BBBB.com in DNS...
{dns} Searching cache for A records for host mail.tw.BBBB.com
{conn} DNS: host mail.tw.BBBB.com found, IP address 59.xxx.xxx.xxx
{conn} Connecting to 59.xxx.xxx.xxx:25...
{smtpc} Connected to mail.tw.BBBB.com
{smtpc} Received greeting: 220 atptw ESMTP MDaemon 6.8.7; Wed, 11 Jul 2007 11:45:07 +0800
{smtpc} Sending EHLO
{smtpc} Switching connection to TLS
{conn} SSL debug: id 0x949fef0 SSL handshake started: before/connect initialization
{conn} SSL debug: id 0x949fef0 SSL_connect:before/connect initialization
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv2/v3 write client hello A
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv3 read server hello A
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv3 read server certificate A
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv3 read server done A
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv3 write client key exchange A
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv3 write change cipher spec A
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv3 write finished A
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv3 flush data
{conn} SSL debug: id 0x949fef0 SSL_connect:SSLv3 read finished A
{conn} SSL debug: id 0x949fef0 SSL handshake done: SSL negotiation finished successfully
{conn} SSL certificate received from mail.tw.BBBB.com is self-signed
{conn} Peer certificate issuer: /C=US/O=ATP Electronics/CN=mail.tw.BBBB.com
{conn} Peer certificate subject: /C=US/O=ATP Electronics/CN=mail.tw.BBBB.com
{conn} Established secure client connection using TLSv1/SSLv3 with cipher RC4-MD5
{smtpc} Sending EHLO
{smtpc} Sent MAIL command
{smtpc} Got reply: 250 <AAAA@cn.AAAA.com>, Sender ok
{smtpc} Sent RCPT TO: <BBBB@tw.BBBB.com>
{smtpc} Got reply: 250 <BBBB@tw.BBBB.com>, Recipient ok
{smtpc} Sent DATA command
{smtpc} Got reply: 354 Enter mail, end with <CRLF>.<CRLF>
{smtpc} Sending message body...
{smtpc} Data sent, got reply: 250 Ok, message saved <Message-ID: 200707111150048935017@cn.AAAA.com>
{smtpc} QUIT sent, got reply: 221 See ya in cyberspace
{conn} SSL debug: id 0x949fef0 SSL3 alert write:warning:close notify
{qproc} SEND_MX: Result for recipient BBBB@tw.BBBB.com: relayed, Status: 2.0.0
{qproc} SEND_MX: Batch of 1 recipients for domain tw.BBBB.com processed, totally processed 1 recipients
{qproc} SEND_MX: Delivery to domain tw.BBBB.com finished, 1 recipients processed
{qproc} SEND_MX: Delivery finished
{threadpool} KThreadPool::workerThread DeliveryThreadPool: worker 15214 task 15214 handled
{threadpool} KThreadPool::releaseTask pool DeliveryThreadPool: sleepingThreadCount=0, newStatus=16
{threadpool} WorkerList DeliveryThreadPool: count=1; status: 15214s2
{threadpool} KThreadPool::workerThread DeliveryThreadPool: worker 15214 finished

[ 本帖最后由 luluboy 于 2007-7-11 17:34 编辑 ]

tdk 发表于 2007-7-11 17:14:01

以后在也不能说 kms的日志简单了 :victory:

luluboy 发表于 2007-7-11 17:42:06

原帖由 tdk 于 2007-7-11 17:14 发表 http://bbs.5dmail.net/images/common/back.gif
以后在也不能说 kms的日志简单了 :victory:
呵呵 有了verbose logs 做事情方便多了。就是现在有些LOG还是看不大懂。。。

还有一个问题：
使用KMS的人知道 在CONSOLE里能通过"配置"－“SSL证书”看到活动证书的过期时间。
此时问题产生了，当SSL证书过期了怎么办？难道重新新建证书？还是申请？如果同事存在两个SSL证书如何操作？
还有个比较白的问题，这里的证书是只那里的证书？
1、KMS的系统使用时间？2、HTTPS或者其他服务？3、难道是SMTP SSL传输？

[ 本帖最后由 luluboy 于 2007-7-11 17:50 编辑 ]

tdk 发表于 2007-7-12 10:23:17

原帖由 luluboy 于 2007-7-11 17:42 发表 http://bbs.5dmail.net/images/common/back.gif

呵呵 有了verbose logs 做事情方便多了。就是现在有些LOG还是看不大懂。。。

还有一个问题：
使用KMS的人知道 在CONSOLE里能通过"配置"－“SSL证书”看到活动证书的过期时间。
此时问题产生了，当SSL证书 ...

我对这个认识也一般，没有特别重视
1 证书不是系统运行证书，过期了应该还可以使用，我做过测试。你也可以找台机器测试一下。
2 证书应该是提供给kms的https smtp 主控登陆等等使用
3 可以自荐证书，但是没有CA认证，一般显示不受信任，也可以去kms认可的CA申请，有可能需要费用。
4 你使用https登陆时候可以看到证书提示，过期后提示证书过期，询问"是,否"继续。
   详细还可以看到证书是否收到信任。

leangwang 发表于 2007-7-12 12:01:36

能否提供做SSL加密的方法

看到各位高手有了解决的方法很高兴,不过本人纯属菜鸟一只,
不知道那位高手可以提供设置SSL加密方法?

tdk 发表于 2007-7-12 13:28:08

这个贴第一页就有啊 有文字 还有图:)

leangwang 发表于 2007-7-13 14:11:40

回复 #39 tdk 的帖子

但是我使用的是exchang 2003!

tdk 发表于 2007-7-13 14:43:06

晕，exc俺还没学呢，你可以去exc的板块问问
或者路过的exc高手给说说
页: 1 2 3 [4] 5
查看完整版本: 用kerio的朋友，有时间做个试验--躲GFW成功了？