邮件服务器-邮件系统-邮件技术论坛(BBS)

标题: 调查一下,你们的SCL防垃圾邮件的闸值为多少 [打印本页]

作者: good2000zc    时间: 2006-4-20 11:37
标题: 调查一下,你们的SCL防垃圾邮件的闸值为多少
调查一下,你们的SCL防垃圾邮件的闸值为多少,我定为7,刚改为6,不知道是否会把一些正常邮件给删除了,我的处理动作是删除。<br>

作者: hzhu    时间: 2006-4-21 07:02
标题: re:by default
by default
作者: chrisqian    时间: 2006-4-21 08:11
标题: re:缺省等于没用;6
缺省等于没用;6
作者: good2000zc    时间: 2006-4-21 16:46
标题: re:有没有设为3的
有没有设为3的<br>

作者: kakafaint    时间: 2006-4-21 17:20
标题: re:8,6
8,6
作者: jonson_hou    时间: 2006-4-21 17:33
标题: re:SCL防垃圾邮件的闸值是什么东东
SCL防垃圾邮件的闸值是什么东东
作者: len_Wang    时间: 2006-4-22 09:17
标题: re:我不敢設,收到幾封郵件垃圾到是小事,有一...
我不敢設,收到幾封郵件垃圾到是小事,有一兩個人收到不到某某郵件﹐那到是大事了。所以是default。
作者: tianfan    时间: 2006-4-22 19:37
标题: re:不知道那东西真正有没有用啊?我设了封存,...
不知道那东西真正有没有用啊?我设了封存,就是没有存过一封邮件
作者: hzhu    时间: 2006-4-24 17:40
标题: re:You configure Intell...
You configure Intelligent Message Filter by setting thresholds for the spam confidence level (SCL) ratings assigned to incoming messages on both the gateway and the Exchange mailbox stores. Intelligent Message Filter evaluates each incoming message and assigns it an SCL rating based on the likelihood that the message is UCE. To set the thresholds above which Intelligent Message Filter takes action on the messages at the gateway and at the mailbox store, use the Block messages with an SCL rating greater than or equal to list in Gateway Block Configuration and the Move messages with an SCL rating greater than or equal to list in Store Junk E-mail Configuration. Each setting on the scale corresponds to an SCL rating that Intelligent Message Filter assigns to incoming messages based on the probability that the message is UCE.<br>
<br>
Selecting a lower number for the SCL rating blocks more messages that could be UCE, but it also increases the likelihood of false positives, which are legitimate messages that Intelligent Message Filter marks as UCE. Some organizations find it acceptable to block a percentage of legitimate e-mail messages to significantly reduce the amount of UCE delivered to their users. If this is the case in your organization, select a lower number for the SCL rating threshold.. <br>
<br>
Selecting a higher number for the SCL rating blocks fewer messages that could be UCE, but it reduces the likelihood of false positives. Many organizations would rather handle more UCE than risk legitimate e-mail messages being blocked. If this is the case in your organization, select a higher number for the SCL rating threshold.<br><br>

作者: good2000zc    时间: 2006-4-26 18:10
标题: re:我设为了6,,,6,今天老板抱怨...
我设为了6,,,6,<br>
<br>
今天老板抱怨说客户发的邮件她收不到,我在邮件跟踪中心里一查找,发现客户发来的<br>
<br>
信被智能邮件筛选器给删除了,赶紧设为8,,,8,再跟踪邮件,发现垃圾邮件呼呼呼<br>
<br>
的进来,真没办法!
作者: lawron    时间: 2006-4-27 08:45
标题: re:我现在用6,6,但是在实际运行中会阻止一...
我现在用6,6,但是在实际运行中会阻止一部分正常邮件,这个问题我也还在研究中。
作者: haigelis    时间: 2006-4-27 09:30
标题: re:我用的是赛们铁可的scl设为6/5...
我用的是赛们铁可的scl设为6/5<br>
<br>
以前设为4的时候也出现过正常邮件无法接受的问题,但可以通过白名单解决该问题。
作者: redksy    时间: 2006-4-27 11:02
标题: re:我的设为8,是存档。能挡住很多,但观察到...
我的设为8,是存档。能挡住很多,但观察到在7级别上,也有很多邮件...<br>
现在在7,8间犹豫ing...
作者: lawron    时间: 2006-4-29 09:22
标题: re:如果设7,6,等于没有阻止大部分垃圾邮件...
如果设7,6,等于没有阻止大部分垃圾邮件,如果设6,6,则正常邮件有10%左右无法收到!




欢迎光临 邮件服务器-邮件系统-邮件技术论坛(BBS) (http://bbs.5dmail.net/) Powered by Discuz! X3.2