标题: raid出了问题，请高手指点。急 [打印本页] 作者: carmen 时间: 2005-5-8 17:44 标题: raid出了问题，请高手指点。急 raid出了问题，请高手指点。急<br>
<br>
公司有点服务器做了RAID 2X2 Mirror/Stripe，一直使用都没事，这几天在启动电脑时<br>
<br>
出现下面英文提示：<br>
<br>
problem is detected with array:<br>
<br>
critical status:<br>
<br>
a disk member of a mirrored array has failed or is not responding.<br>
<br>
the array is still functional, but fault tolerance is disabled.<br>
<br>
before continuing,power off the system and confirm that the drives and <br>
<br>
cables are properly attached before replacing the failed drive and rebuilding <br>
<br>
the array.<br>
<br>
1)identify which drive has failed with the <3> define array menu option<br>
<br>
2)power off the system,replace the failed drive<br>
<br>
3)pestart the system and enter the fastbuild(tm) setup menu<br>
<br>
4)choose the <5> option to rebuild the array with replacement<br>
<br>
还提示按CTRL+F进入设置RAID，按ESC继续启动电脑。我按ESC后可以启动操作系统而且<br>
<br>
可以使用。请问是不是RAID设置或驱序有问题，硬盘里有很多重要的数据，如果删除RAI<br>
<br>
D后再做RAID会不会造成数据丢失？请高手指点。谢谢!作者: carmen 时间: 2005-5-9 09:40 标题: re:进去那一项设置能认回硬盘 进去那一项设置能认回硬盘