一、配置
Router#
Router#en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname juzhong
juzhong(config)#en
juzhong(config)#ena
juzhong(config)#enable se
juzhong(config)#enable secret ?
0 Specifies an UNENCRYPTED password will follow
5 Specifies an ENCRYPTED secret will follow
LINE The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
juzhong(config)#enable secret qqqqqq
juzhong(config)#exit
juzhong#
00:03:58: %SYS-5-CONFIG_I: Configured from console by consoleconf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
juzhong(config)#exit
juzhong#
00:04:04: %SYS-5-CONFIG_I: Configured from console by console^Z
juzhong#q
二、配置IP
User Access Verification
Password:
juzhong>en
Password:
juzhong#show conf
juzhong#show configuration
Using 880 out of 29688 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname juzhong
!
enable secret 5 $1$PkvO$DAtxVUN3sIAdXvG88jsaZ/
!
ip subnet-zero
!
!
!
!
!
!
interface FastEthernet0/0
ip address 10.11.1.254 255.255.0.0
duplex auto
speed auto
!
interface Serial0/0
no ip address
shutdown
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
!
interface Serial0/1
ip address 192.168.254.2 255.255.255.252
encapsulation ppp
!
router rip
network 10.0.0.0
network 192.168.254.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.11.1.253
ip route 10.1.0.0 255.255.0.0 192.168.254.1
ip route 10.2.0.0 255.255.0.0 192.168.254.1
ip route 10.3.0.0 255.255.0.0 192.168.254.1
no ip http server
ip pim bidir-enable
!
!
!
line con 0
password qqqqqq
line aux 0
line vty 0 4
password qqqqqq
login
!
!
end
juzhong#
